STEP 1
Shake the syringe vigorously for at least 10 seconds to ensure a homogeneous suspension.1
FOR US HEALTHCARE PROFESSIONALS ONLY
STEP 1
Shake the syringe vigorously for at least 10 seconds to ensure a homogeneous suspension.1
STEP 2
Select the appropriate needle.1
For administering a deltoid injection
For administering a gluteal injection
STEP 3
Hold the syringe with the tip cap pointing up. Remove the rubber tip cap with a gentle twisting motion.
STEP 4
Peel the safety needle pouch halfway open. Grasp the needle sheath using the plastic peel pouch. Hold the syringe pointing up. Attach the safety needle to the syringe using a gentle twisting motion to avoid needle hub cracks or damage. Always check for signs of damage or leaking prior to administration.1
STEP 5
Pull the needle sheath away from the needle with a straight pull. Do not twist the sheath as the needle may be loosened from the syringe.1
STEP 6
Bring the syringe with the attached needle in upright position to de-aerate. De-aerate the syringe by moving the plunger rod carefully forward.1
STEP 7
Inject the entire contents intramuscularly slowly, deep into the selected deltoid or gluteal muscle of the patient. Do not administer by any other route.1
STEP 8
After the injection is complete, use either thumb or finger of one hand (A, B) or a flat surface (C) to activate the needle protection system. The needle protection system is fully activated when a “click” is heard. Discard the syringe with needle appropriately.1
STEP 1
Shake the syringe vigorously for at least 10 seconds to ensure a homogeneous suspension.1
STEP 2
Select the appropriate needle.1
For administering a deltoid injection
For administering a gluteal injection
STEP 3
Hold the syringe with the tip cap pointing up. Remove the rubber tip cap with a gentle twisting motion.
STEP 4
Peel the safety needle pouch halfway open. Grasp the needle sheath using the plastic peel pouch. Hold the syringe pointing up. Attach the safety needle to the syringe using a gentle twisting motion to avoid needle hub cracks or damage. Always check for signs of damage or leaking prior to administration.1
STEP 5
Pull the needle sheath away from the needle with a straight pull. Do not twist the sheath as the needle may be loosened from the syringe.1
STEP 6
Bring the syringe with the attached needle in upright position to de-aerate. De-aerate the syringe by moving the plunger rod carefully forward.1
STEP 7
Inject the entire contents intramuscularly slowly, deep into the selected deltoid or gluteal muscle of the patient. Do not administer by any other route.1
STEP 8
After the injection is complete, use either thumb or finger of one hand (A, B) or a flat surface (C) to activate the needle protection system. The needle protection system is fully activated when a “click” is heard. Discard the syringe with needle appropriately.1
Reference: 1. INVEGA SUSTENNA® [Prescribing Information]. Titusville, NJ: Janssen Pharmaceuticals, Inc.
Back to Top